Results 1 to 9 of 9
What sort of speed do you think i could get with max?
This is a discussion on What sort of speed do you think i could get with max? within the Speed tests and how to get better results forums, part of the Sky Broadband help and support category; Bandwidth : Down 3,680 Attenuation : 49.0 DB SNRM : 9.5 DB Tx Pwr : 18.5 DBM Bandwidth : UP ...
- 21-06-09, 06:18 PM #1
What sort of speed do you think i could get with max?
Bandwidth : Down 3,680
Attenuation : 49.0 DB
SNRM : 9.5 DB
Tx Pwr : 18.5 DBM
Bandwidth : UP 448
Attenuation : 30.0 DB
SNRM : 20.0 DB
Tx Pwr : 11.5DB
Download Speed: 2703 kbps (335.4 KB/sec-350.3 KB/sec) Upload Speed: 344 kbps (43 KB/sec )
Advertisement- 21-06-09, 06:49 PM #2
Re: What sort of speed do you think i could get with max?
between 3 and 6 meg as when u go over to adsl2+ ur line attenation increases normally by 3 so that would make urs 52dbs but u would see more upload to so if u can get it i would opt in for max
- 21-06-09, 06:52 PM #3
Re: What sort of speed do you think i could get with max?
Nice thanks , i would be happy with 3 meg download speeds anything lower than that i wont be pleased
.
- 21-06-09, 06:56 PM #4
Re: What sort of speed do you think i could get with max?
u might get more , this is just a rough guess are u plugged into ur test socket on ur bt main socket?
- 21-06-09, 07:00 PM #5
Re: What sort of speed do you think i could get with max?
It's plugged into a filtered faceplate , which then goes through an BT80A - RF3 and out the house
- 21-06-09, 07:09 PM #6
Re: What sort of speed do you think i could get with max?
I'm going to remove this RF3 and see if my attentuation changes
- 21-06-09, 07:44 PM #7
Re: What sort of speed do you think i could get with max?
BEFORE : With RF3
Bandwidth : Down 3,680
Attenuation : 49.0 DB
SNRM : 9.5 DB
Tx Pwr : 18.5 DBM
Bandwidth : UP 448
Attenuation : 30.0 DB
SNRM : 20.0 DB
Tx Pwr : 11.5DB
AFTER : Without RF3
Bandwidth : Down 3,780-3,830 <- Gone up
Attenuation : 49.0 DB
SNRM : 11.5 DB <- Gone up
Tx Pwr : 18.5 DBM
Bandwidth : UP 448
Attenuation : 30.0 DB
SNRM : 20.0 DB
Tx Pwr : 11.5DB
- 21-06-09, 10:08 PM #8
Re: What sort of speed do you think i could get with max?
yeah which is better gives u more noise margin to play with thefore will give u a higher sync rate if u were to get it set to 6 with ur current supplier and u should see about 6 to 8 meg i would say or thereabouts
Last edited by iangilf; 21-06-09 at 10:09 PM. Reason: edit
- 21-06-09, 10:34 PM #9
Re: What sort of speed do you think i could get with max?
He is joining Sky day after tomorrow so there is not much point. With BT the line would re-adjust automatically.
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.