Sky max this slow?

[| Nik |]

I think this is all of my router stats as of 23:15. This isnt in the master socket but in another socket upstairs.

--------------------

/usr/sbin/adslctl: ADSL driver and PHY status
Status: Showtime Channel: INTR, Upstream rate = 512 Kbps, Downstream rate = 1664 Kbps
Link Power State: L0
Mode: G.DMT
Channel: Interleave
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 12.3 14.0
Attn(dB): 58.0 31.5
Pwr(dBm): 16.4 6.9
Max(Kbps): 1856 992
Rate (Kbps): 1664 512
G.dmt framing
K: 53(0) 17
R: 16 16
S: 4 8
D: 32 8
ADSL2 framing
MSGc: 1 1
B: 53 17
M: 4 8
T: 1 1
R: 16 16
S: 4.2962 8.8888
L: 432 144
D: 32 8
Counters
SF: 215718 215716
SFErr: 11 0
RS: 3667222 1833586
RSCorr: 8931 28
RSUnCorr: 56 0

HEC: 8 0
OCD: 0 0
LCD: 0 0
Total Cells: 14391695 0
Data Cells: 399264 0
Drop Cells: 0
Bit Errors: 0 0

ES: 36 0
SES: 34 0
UAS: 21 0
Total time = 1 hours 1 min 34 sec
SF = 215718
CRC = 11
LOS = 41
LOF = 0
ES = 36
Latest 1 day time = 1 hours 1 min 34 sec
SF = 215718
CRC = 11
LOS = 41
LOF = 0
ES = 36
Latest 15 minutes time = 1 min 34 sec
SF = 5528
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 15 minutes time = 15 min 0 sec
SF = 52989
CRC = 2
LOS = 5
LOF = 0
ES = 5
Previous 1 day time = 0 sec
SF = 0
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 52931
CRC = 1
LOS = 12
LOF = 0
ES = 10
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 52930
CRC = 4
LOS = 17
LOF = 0
ES = 14
15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
SF = 51340
CRC = 4
LOS = 7
LOF = 0
ES = 7


If this is wrong let me know

[richone54]

they are the right stats
you will need to do a set from the "test" socket (see first link in my sig)

by your stats, it looks like you are a fair way from the exchange (which is one problem that can only be solved by moving closer)
your internal wiring would seem to also be holding you back,
i can see you have looking/posting in other parts of this forum and would hope you have seen some of the parts where improvements have been made (in one thread you are asking about re-wiring and costs), the first test i would do before any changes is from the test socket (this is the quickest way to make sure if your internal wiring is bad)

[| Nik |]

Yea Im interested in resolving it, whether it costs alot or not is the case

Ill make sure that I'll do the test socket tomorrow and post back