Is My Speed Normal?

[ragga]

Hi all im new to this forum and and sky broadband so go easy on me please ive just moved into a area where there's no cable broadband so have opted to give sky a try can someone please tell me if these stats look normal and will I be able to go faster is it worth going up to max etc, im on the mid package.....here's the log

/usr/sbin/adslctl: ADSL driver and PHY status
Status: Showtime Channel: INTR, Upstream rate = 416 Kbps, Downstream rate = 6560 Kbps
Link Power State: L0
Mode: G.DMT
Channel: Interleave
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 10.6 14.0
Attn(dB): 46.0 29.0
Pwr(dBm): 19.8 0.8
Max(Kbps): 7168 1152
Rate (Kbps): 6560 416
G.dmt framing
K: 206(0) 14
R: 16 16
S: 1 16
D: 64 8
ADSL2 framing
MSGc: 1 1
B: 208 14
M: 1 16
T: 1 1
R: 16 16
S: 1.0765 17.0666
L: 1672 120
D: 64 8
Counters
SF: 39696 39694
SFErr: 254 4
RS: 2699388 168699
RSCorr: 16550 8
RSUnCorr: 7282 0

HEC: 217 4
OCD: 7 0
LCD: 0 0
Total Cells: 10435962 0
Data Cells: 299785 0
Drop Cells: 0
Bit Errors: 0 0

ES: 37 0
SES: 20 0
UAS: 135 0
Total time = 1 hours 12 min 42 sec
SF = 243298
CRC = 967
LOS = 31
LOF = 0
ES = 37
Latest 1 day time = 1 hours 12 min 42 sec
SF = 243298
CRC = 967
LOS = 31
LOF = 0
ES = 37
Latest 15 minutes time = 12 min 42 sec
SF = 39696
CRC = 254
LOS = 11
LOF = 0
ES = 12
Previous 15 minutes time = 15 min 0 sec
SF = 51813
CRC = 479
LOS = 6
LOF = 0
ES = 17
Previous 1 day time = 0 sec
SF = 0
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 47518
CRC = 230
LOS = 14
LOF = 0
ES = 5
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 52930
CRC = 1
LOS = 0
LOF = 0
ES = 1
15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
SF = 51341
CRC = 3
LOS = 0
LOF = 0
ES = 2


Thanks for any help btw im connected wirelessly but even when wired still the same speed.....DL 5025 UL 325

[ragga]

please anyone?????????

[Saturday]

Your line attenuation will support ~7750kbps providing it is relatively noise free - it's not, as the stats show a high number of errors.

With or without those errors there's no advantage to you to move to Max unless you need the "unlimited" downloads and higher upload speed.

Please change your skyuser profile. You're on Mid but it says Base.

[ragga]

Thankyou for your reply you have cleared a few things up for me,

just one more thing those errors should i call sky about them so I can get the max speed poss or is it something i need to do internally?

This is a brand Apartment and has all new bt wirering built in the wall

Sorry if this question sounds stupid

Btw im not sure how to change my profile thats why its on base..

Cheers Ragga.

[Saturday]

The errors are either arising from your wiring or in the line between you and the exchange - so your problem or BT's, not Sky's.

The most likely is your wiring. Are you connecting via an extension? For the best possible ADSL signal you should, if possible, connect via your master socket. You may also need to fit a replacement filtered faceplate. See the cabling and faceplate help forum for more info plus details of the tests you need to run to determine where the noise is arising.

You can change your profile by clicking on profile at the top of the page.

[ragga]

Thanks again for your help I will have a look in that forum you mentioned to find out more on the faceplate....

Im not to sure if I have a master socket in this apartment just looks like a normal one to me and its conneted directly to it with the filter its not on a extension.

Ta