Results 1 to 4 of 4
Too much power?
This is a discussion on Too much power? within the Speed tests and how to get better results forums, part of the Sky Broadband help and support category; Just ran mognuts utility and trying to compare my stats with other users. I'm a bit concerned with the seemingly ...
- 14-04-07, 12:02 PM #1
Too much power?
Just ran mognuts utility and trying to compare my stats with other users. I'm a bit concerned with the seemingly high pwr(dBm) reading. Basically because I've no idea if this is a good thing or not, any chance of reassuring me?
I'm happy with speeds in general and have just removed the ringing wire (orange one) from my phone extension. This has upped the d/l speed slightly (by about 2 Mb) so I'm going to go the whole hog and get a new box, faceplate and wiring for the extension instead of my dubious B&Q phone cable and socket.
Status: Showtime Channel: FAST, Upstream rate = 764 Kbps, Downstream rate = 12069 Kbps
Link Power State: L0
Mode: ADSL2+
Channel: Fast
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 6.0 12.5
Attn(dB): 33.0 18.9
Pwr(dBm): 844.8 12.4
Max(Kbps): 12120 864
Rate (Kbps): 12069 764
G.dmt framing
K: 241(0) 24
R: 14 16
S: 1 8
D: 64 8
ADSL2 framing
MSGc: 95 68
B: 240 23
M: 1 8
T: 1 1
R: 14 16
S: 0.6363 7.7037
L: 3206 216
D: 64 8
Counters
SF: 311324 311322
SFErr: 85489 1
RS: 31443784 2646237
RSCorr: 26281493 0
RSUnCorr: 224481 0
HEC: 72270 0
OCD: 0 0
LCD: 0 0
Total Cells:142174545 8976500
Data Cells: 1065965 194996
Drop Cells: 0
Bit Errors: 0 0
ES: 4103 1
SES: 2276 0
UAS: 798 2467
Total time = 1 hours 46 min 58 sec
SF = 311324
CRC = 85489
LOS = 353
LOF = 0
ES = 4103
Latest 1 day time = 1 hours 46 min 58 sec
SF = 311324
CRC = 85489
LOS = 353
LOF = 0
ES = 4103
Latest 15 minutes time = 1 min 58 sec
SF = 7405
CRC = 1960
LOS = 7
LOF = 0
ES = 119
Previous 15 minutes time = 15 min 0 sec
SF = 56005
CRC = 18243
LOS = 87
LOF = 0
ES = 895
Previous 1 day time = 0 sec
SF = 0
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 56005
CRC = 17295
LOS = 85
LOF = 0
ES = 897
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 56005
CRC = 18111
LOS = 80
LOF = 0
ES = 892
15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
SF = 56067
CRC = 17669
LOS = 62
LOF = 0
ES = 791
Advertisement- 14-04-07, 06:58 PM #2
Re: Too much power?
I've done the conversion and your router is putting out 2.51×10 to the power 75
Megawatts.
I'm getting the candles ready for the power failure, or have you got your own Zero Point Module.
Of course it could be a bug.
Convert Power, dBm
- 14-04-07, 08:56 PM #3
Re: Too much power?
I have a spare ZPM lying around. Let me know if you need one,.
P.S it is a misreporting bug, dont worry.Bt phone socket and wiring help >http://www.skyuser.co.uk/forum/cabling-faceplate-help/
Router stats and help on understanding them > http://www.skyuser.co.uk/forum/router-stats/
- 15-04-07, 10:36 AM #4