Help with line

[Mutilator]

Hi everyone I got sky a while ago and have been trying to improve the connection to the best my line can support as I had serious problems at the start. I am on the max package and am 3.12 kilometres away from the exchange. I have put in a XTE-2005 faceplate on the master socket and am running a cable from the ADSL connector to my router.

I am now getting a better connection since the installation of the faceplate but I seem to be getting errors that show up on the config file.

If you can suggest anything I can do to try and improve my connection and minimise errors I would be very grateful.

reply if u want to know anymore information

/usr/sbin/adslctl: ADSL driver and PHY status
Status: Showtime Channel: INTR, Upstream rate = 768 Kbps, Downstream rate = 3328 Kbps
Link Power State: L0
Mode: G.DMT
Channel: Interleave
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 9.1 13.0
Attn(dB): 56.0 31.5
Pwr(dBm): 17.5 12.5
Max(Kbps): 3648 1056
Rate (Kbps): 3328 768
G.dmt framing
K: 105(0) 25
R: 16 16
S: 2 8
D: 64 8
ADSL2 framing
MSGc: 1 1
B: 105 25
M: 2 8
T: 1 1
R: 16 16
S: 2.1509 8.6153
L: 848 208
D: 64 8
Counters
SF: 4397105 4397103
SFErr: 205 148
RS: 149501594 37375375
RSCorr: 160744 672
RSUnCorr: 3112 0

HEC: 188 106
OCD: 3 58
LCD: 0 4
Total Cells: 586721695 0
Data Cells: 16854708 0
Drop Cells: 0
Bit Errors: 0 0

ES: 311 0
SES: 271 0
UAS: 21 0
Total time = 20 hours 46 min 19 sec
SF = 4397105
CRC = 205
LOS = 409
LOF = 0
ES = 311
Latest 1 day time = 20 hours 46 min 19 sec
SF = 4397105
CRC = 205
LOS = 409
LOF = 0
ES = 311
Latest 15 minutes time = 1 min 19 sec
SF = 4646
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 15 minutes time = 15 min 0 sec
SF = 52989
CRC = 0
LOS = 2
LOF = 0
ES = 1
Previous 1 day time = 0 sec
SF = 0
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 52931
CRC = 0
LOS = 2
LOF = 0
ES = 1
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 52930
CRC = 6
LOS = 7
LOF = 0
ES = 8
15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
SF = 52931
CRC = 0
LOS = 0
LOF = 0
ES = 0

[Mutilator]

forgot to mention ive took the ring wires out of all extentions in the house and have now only wire 2 and 5 pluged in

thanks

[Lazarus]

You might try running TCPOptimizer, that may help to make the most of what speed you do have.

First post in this link:

http://www.skyuser.co.uk/forum/speed...onnection.html

You seem to have done just about everything else

[Mutilator]

thanks for the reply il give it a go