Results 1 to 3 of 3
No Satalite Signal
This is a discussion on No Satalite Signal within the Sky & Sky+ TV forums, part of the Other Sky help and support category; looking for help with my sky + box , this morning sky wasnt working , comming up no satalite signal ...
LinkBack URL
About LinkBacks- 21-12-10, 07:26 PM #1
Sky User Member
Exchange:Broadband ISP: Other ISPRouter: Netgear V1 DG834GTSky TV: Sky Basic- Join Date
- Dec 2010
- Posts
- 1
- Thanks
- 0
- Thanked 0 Times in 0 Posts
No Satalite Signal
looking for help with my sky + box , this morning sky wasnt working , comming up no satalite signal received then the number 45 at the corner of the box , was wondering if this meant something , like a code error ? or some help would be great
Advertisement- 22-12-10, 05:12 PM #2
Sky User Moderator
Exchange: BannockburnBroadband ISP: Sky Fibre UnlimitedRouter: Sky Hub SR102Sky TV: Sky+ HD- Join Date
- Dec 2006
- Location
- Central Scotland
- Posts
- 34,256
- Thanks
- 65
- Thanked 1,655 Times in 1,616 Posts
Re: No Satalite Signal
It is an error code, I am not sure exactly what it means, but I think it is something like the dish or LNB not being detected. Could be LND or cable failure. Maybe Ken will post later with a better explanation.
Last edited by Isitme; 22-12-10 at 07:40 PM. Reason: corrected typo error
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.
- 22-12-10, 06:34 PM #3
Sky User Member
Exchange: 0131Broadband ISP: Sky Broadband UnlimitedRouter: Sagem F@ST 2504Sky TV: Sky+HD Thomson- Join Date
- Oct 2008
- Location
- Edinburgh, Scotland
- Posts
- 2,414
- Thanks
- 3
- Thanked 91 Times in 84 Posts
Re: No Satalite Signal
Error codes 45/48 are usually associated with LNB problems. Maybe a F-connector loose. Maybe the LNB's just misbehaving because of freezing temps, it's failing, or there is a temporary transmission problem. Switch off the box at the mains, disconnect then reconnect the two Dish Inputs, then switch on again at the mains, and reboot after 3 minutes.
If that doesn't fix things, try resetting it in Services, 0, 0, 1, Select. In Setup, press red to reset. If that doesn't work, switch off LNB Power Supply and 22KHz Command, press green to save the settings, exit the menu, then re-enable both, remembering to save the settings.
If still no joy, you'll need to get someone out to look at your setup.
There are a lot of problems with weather, atmospherics etc, so you may wish to wait a while for an improvement.Panasonic TX-P50G10B, Onkyo HTS 3305
, Sky+HD Thomson 4E3007 (with upgraded PSU & WD5000AVDS HDD),
Reply With Quote
