Common TV Codes for your Sky Remote

[wizardzee]

Thank you. saved me a lot of time, and worked first time

Try these

0206 1206 1293 0851 0857 1665 1174 1176 1219
1280

0065 0244 0405 0318 0037 0398 0191 0459 0245
0584 0137 0634

You will probably need a REV 8 remote control. If you have a old Sky+ box it may only be REV 6.

To program the remote control unit using a 3 digit code:

1 Turn your TV on.

2 Press TV on your Sky remote control handset.

3 Hold down SELECT and the RED button together for about 2 seconds, until the red light on the Sky remote control flashes twice.

4 Key in your 3 digit code selected for your make of TV from the table below. The light on the Sky remote control should flash twice. If the light flashes only once, recheck the code for your make of TV and start again at Step 1.

5 Press the STANDBY button on your Sky remote control. If your TV switches off, press SELECT. The light on the Sky remote control flashes twice. Now try the other functions.

6 Repeat if necessary using another code.

To program the remote control unit using a 4 digit code:

1 Turn your TV on.

2 Press TV on your Sky remote control handset.

3 Hold down SELECT and the RED button together for about 2 seconds, until the red light on the Sky remote control flashes twice.

4 Press TV on the remote again.

5 Type in the 4 digit code for your TV. The LED on the remote should flash twice. If the LED only flashes once, recheck the code for your brand of TV and start again at Step 1.

6 Press STANDBY, and your TV should turn off. If it doesn't, switch off, press TV, then press the STANDBY button. Repeat this (press TV, then STANDBY) until your TV turns off, then press SELECT.

NOTE: If the LED on the Sky remote control flashes 3 times then all internal codes for that make of receiver have been checked. Repeat from step 1, ensuring that you enter the correct manufacturer code.

7 You should see the TV Guide screen. When you do, the remote control set-up process is complete. If you do not see the TV Guide screen, you must now complete the following steps.

8 Press TV on the remote control.

9 Hold down SELECT and the GREEN button together for about two seconds, until the red light on the Sky remote control flashes twice.

10 Key in the number of the channel on your TV that you use for watching satellite TV.

11 Press SELECT on your remote control. The red light flashes twice. The remote control setup process is complete.

[kayson]

Hi

Can anyone help

Being trying to find a code for the following TV cant find one anywhere

Hannspree SK42TMNB

My Remote version is 8 btw

Thanks

[JRK]

Point control away from TV.

Press TV
Press Select & Red (two flashes)
999
Press TV
Select and Red again
0206

Press TV to nail it. Worked for me.

JRK

[Rothera85]

I need a code for the following LCD Television:

Logix T32WLU55FHID

It doesn't appear on the lists I have been able to find.

Also, My Sky box is connected to the TV in another room and the satellite programmes are sent to the Logix TV via a wireless transmitter.

I have purchased a second sky remote so that I can tune it into the Logix TV.

So far I have been unable to get this to work. Is it me?

Can anyone help please.

[Isitme]

Try 0028 or 0307

[sydenhamdave]

hi everyone. i've got a new Sky+ HD box with a rev9 remote. so far i've been unable to find a code that will operate my Sony STR-DG910 amp volume.. so if anyone is able to help i'd be most grateful. i've googled it endlessly but nothing useful has come up so far. even @skyHD on twitter couldn't help! thanks in anticipation...

[Isitme]

1686 is reported to work with Sony STR models, maybe it will work with yours.

[sydenhamdave]

ok so right after posting that i did one more search and got the answer i was looking for.

the 4 digit code is 1786 (listed in several places) but the crucial extra step is to then press TV again, followed by select and 1 (double LED flash) then Sky.

Now when the remote is in Sky mode it controls the amp volume, and in TV mode it controls the TV volume. Perfect! I hope this helps others in need...

[sydenhamdave]

thanks mate.. as you'll see i managed to get it working after all.

[Isitme]

It seems that xx86 works with nearly all Sony amps. It is just a case of finding the correct first two numbers, 0086 being the first code.