Results 1 to 2 of 2
This is a discussion on upnp enable within the Sky Router forums, part of the Sky Broadband help category; I have had a quick search and cant find the answer i am looking for so i thought i'd post ...
- 18-10-13, 11:05 AM #1
I have had a quick search and cant find the answer i am looking for so i thought i'd post to see if I can solve a small issue.
when I try to enable upnp on my Sagem 2504 and click apply it refreshes but never enables. I cant get to enable however much I try.
- 18-10-13, 05:34 PM #2
Re: upnp enable
You don't really need it enabled, in fact some say that having it enabled is a security risk as it can provide a back door for malware.
You could try enabling UPnP then boot the router immediately. Don't click apply. If that does not work try resetting the router by sticking a pin in the reset hole and hold it there until the lights start to flash. Try enabling again. You should save your settings before doing this so they can be easily reapplied.
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.