Results 1 to 3 of 3
upnp and ports stuck open
This is a discussion on upnp and ports stuck open within the Sky Router forums, part of the Sky Broadband help category; Hi all. New sky subscriber and now have my first issue. Connected with the D link router sky sent yesterday ...
- 23-02-11, 10:14 AM #1
upnp and ports stuck open
Hi all. New sky subscriber and now have my first issue.
Connected with the D link router sky sent yesterday but have ran into a issue already.
I connected a device to the router via ethernet that supported upnp. I only used it for 15mins or so and turned it off. But the ports it made the router open via its upnp feature seem to be stuck open. I have tried turning upnp off but its made no difference.
Picture of the ports that arent closing in the upnp page on D link setup.
Thanks for anyhelp.
Advertisement- 23-02-11, 11:13 AM #2
Re: upnp and ports stuck open
Maybe a bit obvious, but have you tried clicking the Refresh link?
You could try rebooting the router.
If that does not clear it and you are really worried, you can reset the router by pushing a pin in the reset hole until the power and tick lights flash. Be aware you will loose any personal settings.
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.
- 23-02-11, 11:24 AM #3
Re: upnp and ports stuck open
Yeh i tried clicking the refresh button. It doesn't seem todo anything.
I'm not that worried. But if it does this with every device or program that opens ports via upnp after a while that list is gonna become huge and then it will start to be a issue.
I haven't tried rebooting router cause my speed has increased from the 4mbit sync and i dont want to mess up the 10 day training period.
Reseting the router would do the same thing.