Results 1 to 7 of 7
Sky SR102 router to Netgear r7000 NAT problems
This is a discussion on Sky SR102 router to Netgear r7000 NAT problems within the Sky Broadband help forums, part of the Sky Broadband help and support category; Hi ive connected my sky router to my Netgear R7000, I have internet on all my devices but have restricted ...
- 21-01-17, 06:12 PM #1
Sky SR102 router to Netgear r7000 NAT problems
Hi ive connected my sky router to my Netgear R7000, I have internet on all my devices but have restricted NAT settings on my Xbox One, Are the two routers conflicting in anyway?
Thanks
Advertisement- 21-01-17, 07:01 PM #2
Re: Sky SR102 router to Netgear r7000 NAT problems
Your problem is you have a double NAT, this happens when you chain routers.
--------------------------------------------------------
Artificial Intelligence is no match for Natural Stupidity.
--------------------------------------------------------
- 21-01-17, 07:39 PM #3
- 21-01-17, 07:45 PM #4
Re: Sky SR102 router to Netgear r7000 NAT problems
I would turn off the dhcp and everything else on the R7000, turn on the dhcp on the 102 and connect the output of the 102 to a LAN port on the R7000. just use the R7000 as an Wifi access point, there is no alternative unless you go down a different route entirely, such as replacing the R7000 with a D7000 and getting rid of the 102 completely.
--------------------------------------------------------
Artificial Intelligence is no match for Natural Stupidity.
--------------------------------------------------------
- 21-01-17, 08:50 PM #5
Re: Sky SR102 router to Netgear r7000 NAT problems
I did turn off dhcp on my r7000 and just had it turned on my 102, I turn my xbox on and it comes up with no dhcp cant connect
- 21-01-17, 10:11 PM #6
Re: Sky SR102 router to Netgear r7000 NAT problems
Have you moved the connection between the 102 and 7000 to Lan to Lan?
--------------------------------------------------------
Artificial Intelligence is no match for Natural Stupidity.
--------------------------------------------------------
- 22-01-17, 04:46 PM #7
Re: Sky SR102 router to Netgear r7000 NAT problems
You could try putting the Xbox's address into the DMZ of the SR102. This means it will be bypassing the firewall but there is little danger in this with a console. Definitely not recommended with a PC.
Follow the instructions here and you should not have connection problems - http://www.skyuser.co.uk/forum/askin...-together.html
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.