CISCO ASA and Draytek Vigor 120

[walkersway]

Has anyone manage to get a CISCO ASA and draytek vigor 120 DSL modem working?

I have tried with the draytek in its default configuration and then setting up the asa in PPoE. I appear to get an IP address on the ASA but i get no internet access.

Thanks

[gmangt4]

Hi
I don't use that set up but I have used the Vigor 120 and numerous routers, be aware that I lose 3Mb sync speed when I use the Vigor over a broadcom based modem.

What I do is set the vigor up and ensure internet connection, I then set up the router separately with all the details, I then turn both off and wire them to each other, I then power on the vigor and wait until fully booted up then I power on the router, once fully booted up I then test for internet, I found this sequence to be important
I hope that helps

[walkersway]

Thanks. I have set this up using a meraki firewall and it works fine. Just can not get this to work with the ASA.

Hi
I don't use that set up but I have used the Vigor 120 and numerous routers, be aware that I lose 3Mb sync speed when I use the Vigor over a broadcom based modem.

What I do is set the vigor up and ensure internet connection, I then set up the router separately with all the details, I then turn both off and wire them to each other, I then power on the vigor and wait until fully booted up then I power on the router, once fully booted up I then test for internet, I found this sequence to be important
I hope that helps