new ASUS router: drops connection

[fufu68]

I have just replaced my ageing DLINK router with the ASUS DSL-N17U and find that it drops the broadband connection after a few hours.

Can anyone confirm the correct settings. Portion of log attached below.

(I was originally a BE customer, and I don't think Sky sent me their own router when I moved to them.)

2016-02-20 20:55:38 syslog: Connect: ppp0 <--> 0.38
2016-02-20 20:56:08 syslog: LCP: timeout sending Config-Requests
2016-02-20 20:56:08 syslog: Connection terminated.
2016-02-20 20:56:08 kernel: mt7510_config
2016-02-20 20:56:09 kernel: tc3162_atm_close done
2016-02-20 20:56:09 syslog: Modem hangup
2016-02-20 20:56:09 syslog: LCP down.
2016-02-20 20:56:13 syslog: LCP is allowed to come up.

----------

FwVer:5.5.1.135_A_A60901 HwVer:T14.F7_0.2
DSL Link Status	up
0days 0hours 40minutes 16seconds
DSL Modulation	ITU G.992.5(ADSL2PLUS)
ANNEX Mode	ANNEX A
SNR Down	6.0 dB
SNR Up	10.1 dB
Line Attenuation Down	29.8 dB
Line Attenuation Up	15.9 dB
Path Mode	Interleaved
Data Rate Down	14430 kbps
Data Rate Up	1043 kbps
MAX Rate Down	16412 kbps
MAX Rate Up	1047 kbps
POWER Down	19.2 dbm
POWER Up	11.3 dbm
CRC Down	6
CRC Up

DSL Modulation	Auto Sync-UpVDSL2ADSL2+ADSL2G.DMTT1.413G.lite
ANNEX Mode	ANNEX AANNEX IANNEX A/LANNEX MANNEX A/I/J/L/MANNEX BANNEX B/J
Dynamic Line Adjustment (DLA)	Enabled Disabled
Stability Adjustment (ADSL)	Disabled Disabled 10 dB 9 dB 8 dB 7 dB 6 dB 5 dB 4 dB 3 dB 2 dB 1 dB -1 dB -2 dB -3 dB -4 dB -5 dB -6 dB -7 dB -8 dB -9 dB -10 dB
Rx AGC GAIN Adjustment (ADSL)	Default Stable High Performance
Stability Adjustment (VDSL)	Disabled 5 dB 6 dB 7 dB 8 dB 9 dB 10 dB 11 dB 12 dB 13 dB 14 dB 15 dB 16 dB 17 dB 18 dB 19 dB 20 dB 21 dB 22 dB 23 dB 24 dB 25 dB 26 dB 27 dB 28 dB 29 dB 30 dB
Tx Power Control (VDSL)	Disabled 3 dB 2 dB 1 dB 0 dB -1 dB -2 dB -3 dB -4 dB -5 dB -6 dB -7 dB
Rx AGC GAIN Adjustment (VDSL)	Default Default Stable High Performance
UPBO - Upstream Power Back Off (VDSL)	Auto Enabled Disabled
ESNP - Enhanced Sudden Noise Protection (VDSL)	Default Default Stable
SRA (Seamless Rate Adaptation)	Enabled Disabled
Bitswap (ADSL)	Enabled Disabled
Bitswap (VDSL)	Enabled Disabled
VDSL Profile	30a multi mode 17a multi mode
G.INP (G.998.4)	Disabled Enabled
G.vector (G.993.5)	Enabled Disabled
Non-standard G.vector (G.993.5)	Enabled Disabled

[fufu68]

This has just appeared on the router:
Your DSL line appears to be unstable. DLA (Dynamic Line Adjustment) which enabled by default already adopted necessary changes and ensure stability. However if interruption continues please submit a feedback form for our analysis.