Results 1 to 2 of 2
Increasing My upstream
This is a discussion on Increasing My upstream within the Sky Broadband help forums, part of the Sky Broadband help and support category; Hi people I have over the last two months had my line switched over to the green cabinet, which has ...
- 15-01-16, 12:51 PM #1
Increasing My upstream
Hi people
I have over the last two months had my line switched over to the green cabinet, which has just being installed up the road from me, I am currently on LLU with;
System Details
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Modem
Modem Status Connected
DownStream Connection Speed 23999 kbps
UpStream Connection Speed 797 kbps
VPI 0
VCI 38
IPv6 Loopback Address ::1/128
Link downstream upstream
att 5.0 db 5.1db
NM 3.4db 15.0db
was getting 1100 kbps, now getting 797 kbps! I am thinking the upload has reset since they moved the line into a bt green cabinet.
I am now going to move over to FIBRE on following Friday Next week though in the meantime can I get some software so I can get it back up too 1100 kbps.
Kenneth
Advertisement- 15-01-16, 02:47 PM #2
Re: Increasing My upstream
There is no software that will get your speed back. With your download speed I would have expected an upload of 1300kbps. It looks like you have some interference from somewhere. Are all your connections to the phone line fully filtered? If so, try plugging into the Test socket using only the filter and adsl cable supplied by Sky. See if that makes any difference to your u/l speed.
How to test your ADSL in the Master Test Socket
It would do no harm to post your full stats.
How to get your Sky Router statistics
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.
-
The Following User Says Thank You to Isitme For This Useful Post:
siege2 (15-01-16)