Regular router syncing

[ah1604]

Hi all having a few problems with my connection,ive been on a adsl2+ profile for ages
but the problems come and go

would i be better on a g.dmt profile with me having a long line?

my line has just dropped from 2515 down 760 up to this


adsl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 0
Channel: FAST, Upstream rate = 135 Kbps, Downstream rate = 1898 Kbps
Link Power State: L0
Mode: ADSL2+
Channel: Fast
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 8.1 6.7
Attn(dB): 62.5 34.5
Pwr(dBm): 13.1 11.4
Max(Kbps): 1744 132
Rate (Kbps): 1898 135
G.dmt framing
K: 111(0) 4
R: 10 16
S: 1 16
D: 16 2
ADSL2 framing
MSGc: 29 13
B: 110 3
M: 1 16
T: 1 4
R: 10 16
S: 1.8544 14.2222
L: 522 45
D: 16 2
Counters
SF: 75536 76565
SFErr: 2 20985
RS: 2643770 344240
RSCorr: 353 7593904
RSUnCorr: 13 0

HEC: 1 260397
OCD: 0 0
LCD: 0 0
Total Cells: 5485660 742185763
Data Cells: 202188 812350453
Drop Cells: 0
Bit Errors: 0 19691888

ES: 1 6704
SES: 0 980
UAS: 18 55213
AS: 1226

INP: 1.22 2.84
PER: 16.22 16.88
delay: 7.41 7.11
OR: 17.25 9.00

Bitswap: 111 18

Total time = 21 min 1 sec
SF = 75536
CRC = 2
LOS = 0
LOF = 0
ES = 1
Latest 1 day time = 21 min 1 sec
SF = 75536
CRC = 2
LOS = 0
LOF = 0
ES = 1
Latest 15 minutes time = 6 min 1 sec
SF = 22253
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 15 minutes time = 15 min 0 sec
SF = 53283
CRC = 2
LOS = 0
LOF = 0
ES = 1
Previous 1 day time = 0 sec
SF = 0
CRC = 0
LOS = 0
LOF = 0
ES = 0
Showtime Drop Reason: 0
Last Retrain Reason: 0

[fuzzy logic]

Your upstream is really low, with no spare spare noise margin, apart from a line fault, that can also be caused by a faulty filter, or something connected to the phone line without a filter, so I would try the router in the test socket, with nothing else connected to see if the noise margin or sync rate improves.

If you want to try g.dmt to see if it is any better, you can temporarily force it with the adslctl command either via telnet "adslctl configure --mod d", or assuming that's a netgear using the "Target noise margin tweak" Mel's Notes: Sky Netgear DG834GT-1skuk - tick the force G-DMT box and leave the target noise at 100 which is the normal default, the click the resync button.