Are my stats ok, Just moved house.

[graeme122]

Ok thanks I'll get on it asap, there's alot of phone sockets 1 in the living room, 1 in the hall, 1 in all three bedrooms upstairs. We also have sky multiroom in all 3 rooms upstairs aswell as in the living room. I also had a look at all the sockets and none had a test socket, the only socket that looked any different was the one in the hall as it has a T in the bottom right.
.

Another strange thing is the socket in the hall has 2 white wires coming out the bottom and go up stairs to a socket in one of the bedrooms.

You said I should use a filter on all sockets if I do that what would I put in the ADSL socket on the filter.

What is this ADSL TRANING thing im getting.

Another thing is Im seeing Network Type MER on the sky 192.168.0.1 page. I can't ever remember it being that.

Here are some more stats

System Up Time: 1:00:33
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time
WAN MER 1860 2383 0 0 0 0:33:17
LAN 15 0 0 0 0 1:00:33
WLAN 7179 6337 0 224 208 1:00:06
ADSL Link Downstream Upstream
Connection Speed 384 kbps 414 kbps
Line Attenuation 54.5 db 30.0 db
Noise Margin 2.5 db 6.7 db

[Isitme]

there's alot of phone sockets 1 in the living room, 1 in the hall, 1 in all three bedrooms upstairs. We also have sky multiroom in all 3 rooms upstairs aswell as in the living room.

I think that is your problem. They are probably not plugged into filters. Get everyone to disconnect everything they have plugged into a phone socket and take the stats.

That is an old type master socket.

[graeme122]

So what does ADSL TRANING mean.

[Isitme]

what would I put in the ADSL socket on the filter.

Sorry I missed that earlier. One filter, the one you are using for the router, would have the ADSL cable plugged into it, the rest would just be left empty.

ADSL training just means it is trying to connect, nothing to worry about. It does not mean it is on DLM or anything like that.

[graeme122]

Ok I just checked and I had to add a filter to a bedroom, There are filters everywhere else but still no improvement.

System Up Time: 0:35:08
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time
WAN PPPoA 10916 13162 0 0 0 0:33:05
LAN 15 0 0 0 0 0:35:08
WLAN 16829 14017 0 0 0 0:34:41
ADSL Link Downstream Upstream
Connection Speed 384 kbps 414 kbps
Line Attenuation 55.0 db 30.5 db
Noise Margin 2.2 db 10.5 db

[Exdee]

The way things are you need to replace the master with either a nte5 with a filtered faceplate or a XTF-85 and keep the router there.

[graeme122]

Not going to be possible unless I kiss a certain someone's feet. Which im not going to do.

[Exdee]

lol. Sorry

Is replacing the master socket going to be a problem or keeping your router downstairs?
Or both?

[graeme122]

Replacing the master socket is going to be the problem, I can keep the router downstairs. I think the broadband is screwed, what would be my next best option.

[Exdee]

The XTF-85 is a faceplate with two screws similiar to your current master socket with a 'T'. So cosmetically there won't be a big difference between the two.

Only other option is to get Virgin broadband if you are in a cable area and scrap adsl broadband.