This is a discussion on Forwarding within the Sky Broadband (Fibre) Help forums, part of the Sky Broadband help and support category; Hi This may have already have been covered so could someone please point me in the right direction. I want ...
- 28-06-13, 06:32 PM #1
This may have already have been covered so could someone please point me in the right direction.
I want it so that when i type in my dyndns address i want it to go a ip address on my network not my router settings page.
I have the sr101
- 29-06-13, 03:54 PM #2
You will have to include the port number you have opened for the device. For example if you have a DVR with an address of 192.168.0.100 and you have openned port number 8000 for it, you would access it by typing www.yourip.dnns.org:8000. If you do not stipulate a port number, you will only get access to your router settings.
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.