how will i know?
This is a discussion on how will i know? within the Sky Anytime + forums, part of the Sky On Demand category; Originally Posted by valhalla already checked that m8 its enabled, has is anytime To force an update: Unplug the power ...
- 31-10-10, 03:04 PM #11
Re: how will i know?
Unplug the power lead then press and hold the back-up button on the box (not the remote) and plug the power lead in again. Don't touch the cable from the dish when it's plugged in or you may get a small shock.
Keep the back-up button pressed until all the lights on the box come on. Then you can release the button and when the firmware has downloaded (may take a little while) the box will go into standby. Leave for about 5 mins and then switch on again.
It's quite some time since I did this so I hope it's still done this way.
Alternatively, phone 08442 41 41 41 and ask Sky to do it.