Everything you need to know about internal telco wireing but were afraid to ask...

[Sphinxy]

From looking at this guide, im now questioning my wiring.

Basically i have the drop wire coming from outside to inside and i have the 2 wires plugged into the A/B part of the Mastersocket. I dont have a faceplate plugged over it, so im basically just using my Test socket as to where my filter is plugged into.

Do you need all those extra color cables wired into anything for it to make the whole shibang work.

With my current cabling (Blue/White and White/Blue) cables wired to the master socket i am getting internet access and phone.

But my sync rate is next to nothing. I have a feeling this is beyond my fixing.
From what ive read all you need is those 2 wires to wired and you're set to go.

[Isitme]

You only need the 2 wires from the incoming cable fixed to the AB terminals on the inner plate.. If you have extension sockets these are wired into the faceplate. If you don't have extensions, you will have no wires attached to the facepate.

[Sphinxy]

You only need the 2 wires from the incoming cable fixed to the AB terminals on the inner plate.. If you have extension sockets these are wired into the faceplate. If you don't have extensions, you will have no wires attached to the facepate.

Great, thanks for clarifying that for me man.