Results 1 to 3 of 3
Good result fitting XTE-2005
This is a discussion on Good result fitting XTE-2005 within the Cabling and faceplate help forums, part of the Sky Broadband help and support category; Just fitted an ADSLNation XTE-2005 Professional Quality Master Faceplate Filter + Belkin CC3011AED07 2.1m High Speed RJ11 to RJ11 Internet ...
- 25-06-09, 11:28 AM #1
Good result fitting XTE-2005
Just fitted an ADSLNation XTE-2005 Professional Quality Master Faceplate Filter + Belkin CC3011AED07 2.1m High Speed RJ11 to RJ11 Internet Modem Cable and immediately went from 7MB see stats -
ADSL Link Downstream Upstream
Connection Speed 8190 kbps 767 kbps
Line Attenuation 40.5 db 21.6 db
Noise Margin 7.5 db 15.9 db
Would l get any more speed if l asked to be uncapped looking at my stats.
Advertisement- 25-06-09, 11:30 AM #2
Re: Good result fitting XTE-2005
you're pretty much at the limit already...
-------------------------------------------
Useful Sticky: - How To Obtain Your Router Stats, BT Speed Test, Check For Test Socket
- 25-06-09, 04:37 PM #3
Re: Good result fitting XTE-2005
There is a wide disparity in lines of equal attenuation, this for example is another users -
ADSL Link Downstream Upstream
Connection Speed 10239 kbps 796 kbps
Line Attenuation 40.5 db 23.8 db
Noise Margin 12.2 db 13.0 db
You seem to have one of the bad ones
TomD
Please note the views and recommendations in my posts are my own and in no way reflect the views of SkyUser.
Useful Utilites
https://www.nirsoft.net/utils/wifi_information_view.html/ TCPOptimiser /Test Socket
Note - When downloading always select the Custom install or you will end up with stuff you don't want.