Results 1 to 2 of 2
Only Master Bad Errors?
This is a discussion on Only Master Bad Errors? within the Cabling and faceplate help forums, part of the Sky Broadband help and support category; I only have a master socket. The BT drop cable comes into the house and changes to white internal cable ...
- 12-09-07, 02:25 PM #1
Only Master Bad Errors?
I only have a master socket. The BT drop cable comes into the house and changes to white internal cable in a small white box. Then white BT calbe runs about a meter to the BT master socket and i have a filtered face plate.
The drop cable is connected to the white cable with small jelly crimps if you know what i mean.
Here are my stats:
/usr/sbin/adslctl: ADSL driver and PHY status
Status: Showtime Channel: INTR, Upstream rate = 768 Kbps, Downstream rate = 6976 Kbps
Link Power State: L0
Mode: G.DMT
Channel: Interleave
Trellis: ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 11.1 13.0
Attn(dB): 41.0 27.0
Pwr(dBm): 19.8 8.8
Max(Kbps): 7616 1216
Rate (Kbps): 6976 768
G.dmt framing
K: 219(0) 25
R: 16 16
S: 1 8
D: 64 8
ADSL2 framing
MSGc: 1 1
B: 228 25
M: 1 8
T: 1 1
R: 16 16
S: 1.0698 8.6153
L: 1832 208
D: 64 8
Counters
SF: 7579225 7579223
SFErr: 251 152
RS: 515387342 64423395
RSCorr: 110298280 538
RSUnCorr: 5214 0
HEC: 234 24
OCD: 0 130
LCD: 0 2
Total Cells: 2119900062 0
Data Cells: 104684211 0
Drop Cells: 0
Bit Errors: 0 0
ES: 4785 0
SES: 1439 0
UAS: 40 0
Total time = 1 days 17 hours 32 min 28 sec
SF = 8793624
CRC = 72112
LOS = 23
LOF = 0
ES = 4785
Latest 1 day time = 17 hours 32 min 28 sec
SF = 3714540
CRC = 31
LOS = 10
LOF = 0
ES = 29
Latest 15 minutes time = 2 min 28 sec
SF = 8704
CRC = 1
LOS = 0
LOF = 0
ES = 1
Previous 15 minutes time = 15 min 0 sec
SF = 52930
CRC = 0
LOS = 0
LOF = 0
ES = 0
Previous 1 day time = 24 hours 0 sec
SF = 5079084
CRC = 72081
LOS = 13
LOF = 0
ES = 4756
15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
SF = 52931
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
SF = 52989
CRC = 0
LOS = 0
LOF = 0
ES = 0
15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
SF = 52931
CRC = 0
LOS = 0
LOF = 0
ES = 0
The errors do get worse sometimes, What can I do?
If i report it as a line fault for voice calls will i loose me BB again like the last time i reported a fault with voice. They seem to cut off BB first to fix any voice faults then take about 2 weeks to get BB back.
gav425
Advertisement- 12-09-07, 07:24 PM #2
Re: Only Master Bad Errors?
once the fault with the PSTN is fixed - if the have disconnected you just call sky to log a fault to BT and it gets reconnected within a day, unless ur unlucky enuff to have faulty ties
-------------------------------------------
Useful Sticky: - How To Obtain Your Router Stats, BT Speed Test, Check For Test Socket