Username & Password from a Sky DG934G Router
Originally devised by James67
Update: September 2008
This tutorial is no longer needed to obtain your username and password from the Netgear V2 Sky DG934G Router. You can just visit Jame's website and input the details required, to reveal the username and password.
You can also use Jame's website to obtain the username and password from the additional Sky routers:
Sky Netgear DG834GT
Sky Sagem F@ST 2504
This tutorial only applies to a Black Netgear V2 Sky DG934G Router
Download the unofficial updated Firmware at your own risk (this image has now been removed)
And save to your desktop or a location of your choice.
Go to your browser and type in http://192.168.0.1 then using your username and password, which is usually admin and sky, log into the router.
- Select Router Upgrade
- Click Browse and then look for the file you just downloaded and select it
- Once selected, click on Upload
- Do not turn your router off or touch until it completes the process
Once this has finished and you have reconnected on your Sky Broadband connection, open a Command Prompt and type the following:
- Telnet 192.168.0.1 then hit enter
- Type cat /tmp/password.txt then hit enter
Your username and password should then appear in the Telnet Box. Make a note of this for reference purposes if you wish to.
SkyUser make this information available in the interests of our members. Please do not upgrade your FW unless you fully understand the risks that it could go wrong and render your router useless. Please remember also, that it is against the Terms and Conditions of Sky Broadband. You also run a high risk of having your Broadband Connection suspended as well as receiving no Technical Support.