Home | Tutorials | Sagem F@ST2504 - Get The Latest FW - 1.9Sky

Sagem F@ST2504 - Get The Latest FW - 1.9Sky

Font size: Decrease font Enlarge font

This tutorial will show you how to get the latest Firmware for your Sagem F@ST2504 router

 

The method shown below has now worked for a number of different people from all over the UK.

http://192.168.0.1

Username: admin
Password: sky (unless you have changed it)

Scroll down,

a) Click Connection Status
b) Click Disconnect
c) Once disconnected, click Connect

This may or not work, however the majority who have tried this method, have reported success.

Comments (17 posted):

meroberts on 08 October, 2008 20:20:49
avatar
Worked for me after a few minutes delay
vshears on 24 January, 2009 12:10:57
avatar
Just swapped over from my Netgear Version 1 Router (white) to my Sagem today. Followed the above technique and it updated within a few minutes.
Genesee on 12 April, 2009 02:46:29
avatar
thanks, worked for me, now running 1.9sky
ashokpath on 22 April, 2009 23:41:53
avatar
Nope, didn't work.
Quinnster77 on 10 June, 2009 10:57:20
avatar
I found that as i had changed loads of settings on mine, a factory reset was needed before the process would work.
Darren on 10 June, 2009 14:42:59
avatar
I'm tempted to go back to my NetGear V1 router. At least you can use OpenDNS on it!!
Bus on 27 June, 2009 09:46:23
avatar
how comes when i try it it doesnt work???
dwranson on 15 July, 2009 19:26:01
avatar
hasn't worked for me. I'm on 1.5SKY. Do i need to do a factory reset for this to work. Got loads of settings i don't want to lose.
NewsreadeR on 17 July, 2009 00:32:18
avatar
I think that Sky have turned the update servers off, hence why it is not working. It did work using this method for months.
quinnster77 on 20 July, 2009 17:20:15
avatar
Backup your settings, then factory reset, follow the steps above, then reload your config. Worked for me
Phill on 17 August, 2009 20:05:50
avatar
Just done it, (tried a dozen times about a month ago). worked fiorst time.. Maybe Sky turned the update servers back on?
Phill Holt on 17 August, 2009 20:10:44
avatar
Now workingagain
Chris on 29 August, 2009 08:47:16
avatar
how do you obtain standard (ie non sky) firmware for the Sagem 2504?
Alan on 17 January, 2010 23:41:11
avatar
thank it work on mine
Ray on 31 January, 2010 21:08:08
avatar
Thanks loads! Been trying to figure this out for ages!!!

Happy now :)
boothy_08 on 11 February, 2010 00:22:16
avatar
mines already 1.9 so im ok :D
Jeff on 09 April, 2010 23:10:35
avatar
Worked for me today!

Post your comment comment

Please enter the code you see in the image:

  • email Email to a friend
  • print Print version
  • Plain text Plain text
Sky Broadband Fibre help, support and news Visit our forums Test your broadband speed
Tags
Rate this article
5.00