Welcome to Sky User - The unofficial support forum for everything Sky!

Advertisement

Sky Remote Control TV Code Checker


Notes

How to find a code for your Sky Remote Control on our TV Codes Checker

To find a code simply select a letter above that matches the make of TV you own.

NB: Sky are now publishing further codes, these can be found on any Sky receiver by pressing the red button for interactive and going to "Sky Technical".

Programming your Sky remote control

The Sky remote control can also operate the basic TV functions (Channel changing / volume control / Text etc) on around 90% of TV manufacturers. The 4 digit code (Shown in your Sky handbook) is used to identify the make and manufacturer of your TV. The individual 3 digit codes are used for each manufacturer.

To program your Sky remote control using the 3 digit code.

  1. Switch on the TV set
  2. Press the TV button on the Sky Remote
  3. Hold down the Select and Red buttons for 2-3 seconds until the LED blinks twice
  4. Enter the 3 digit code
  5. Press the Select button to store

Press TV and any number to test, If this does not operate the TV set try below.

To program your Sky remote control using the 4 digit code

  1. Switch on the TV set
  2. Press the TV button on the Sky Remote
  3. Hold down the Select and Red buttons for 2-3 seconds until the LED blinks twice
  4. Press the TV button on the Sky Remote again
  5. Enter the 4 digit code for your make of TV
  6. The LED should blink twice, if not recheck the 4 digit code used and go back to 1
  7. Press the standby button on the Sky Remote (The TV should go to standby)
  8. Press the Select button to store

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.

Programming the Sky Remote control to view Sky on an RF channel

Most installations comprise of a Scart connection from the Sky receiver to the TV. This is normally activated by pressing the Sky button for viewing Sky. For installations where the use of a Scart lead is not possible the Sky button on the remote can be set to instruct the TV to go to channel 6 (Or any channel that Sky is normally viewed on) and switch on the Sky receiver.

  1. Press the TV button on the Sky Remote
  2. Hold down the Select and Green buttons for 2-3 seconds until the LED blinks twice
  3. Enter the program number for the TV channel which Sky is normally viewed on
  4. Press the Select button to store, the LED should blink twice

Now you only need press the Sky button to view Sky on your chosen TV channel.

Need a code for your Television that is not listed? Or do you have a code we could add? Let us know in our Sky Remote Codes thread here.

All credit to UseLess for coding this Sky Remote Code Checker for SkyUser.

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

Y

Z