Results 1 to 10 of 46
Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
This is a discussion on Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga within the Sky+ HD Supertelly forums, part of the Other Sky help and support category; Hi Group..I have recently posted on this subject before despite getting a lot of help from members Isitme,Scubby and Gymno,I ...
- 10-08-12, 11:46 AM #1
Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
Hi Group..I have recently posted on this subject before despite getting a lot of help from members Isitme,Scubby and Gymno,I couldnt get my Toshiba DR20 DVdr and AEI Digisender DG200 to work with the new SKY+HD Box and I sent the box back to Sky and reinstalled my Drx280 Sky+ Box. This box has now gone u/s so Sky have given me another DRX890 .I have now replaced my AEI Digisender with the DG400 model and purchased a twin Scart splitter with a switch on it.
I have just installed the new Sky HD Box and connected the DVDR and New Digisender as per GYMNOS suggestion ie
1 Connect DVDR and SKY Box to TV with HDMI cables
2 Plug Scart into Scart on SKY Box and plug other end into DECODER IMPUT SCART on DVDR.
3.Plug DIGISENDER into TV OUTPUT SCART of DVDR.
DOESN'T WORK as can,t get any signal on TV in Bedroom.[tried HDMI 1 and 2 AV1 and AV2 channels nothing not even black screen].
4 Contacted Toshiba support..Informed that there is NO Straight Through Signal Ability,when DVDR is Switched off,so switched it on and still no signal!!!
Tried the suggestion put forward by SCUBBY ie
1.From SKY HD Box take Scart from there to IMPUT Decoder on DVDR
2 From DVDR Output Scart [tv] connect Scart cable of Splitter
3 Splitter A Scart..Plug Scart to AVI on TV
4 Splitter B Scart Plug in Digisender
Signal Should pass thro' DVDR but doesn't when its switched off[see note to Gymno]
Still cant get a signal upstairs on second tv!!!
ISITME suggested the following.
1 Plug Digisender directly into SKY HD BOX and disconnect the DVDR.
2 Plug HDMI cable into SKY HD BOX and plug other end into TV HDMI
3 BINGO !!!! get signal on TV Upstairs [as Downstairs] but can't alter the Channels upstairs despite new Digisender which is advertised to work with all known Satellite boxes!!
4 Tried various positions for digi eye in front to the left side of eye on SKY BOX,Tried New HD Remote and old Sky + remote No luck!
Has anyone any further suggestions????
Michael
Advertisement- 10-08-12, 11:54 AM #2
- 10-08-12, 12:41 PM #3
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
Depending on the Scart splitter, some allow all 3 ports to see the same signal, others allow A & B to see C, but A can's see B.
It may be worth checking through piece by piece that:
a. DVDR is connected in correct order to show image on TV
b. that both outputs are live simultaneously
- 10-08-12, 01:38 PM #4
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
It looks like the IR transmitter may be incorrectly placed. I am not sure where the detector is placed on the DRX890, maybe someone can tell you exactly where to place the transmitter.can't alter the Channels upstairs despite new Digisender which is advertised to work with all known Satellite boxes!!
TomD
Useful Utilites
IP Tracer /Inssider / TCPOptimiser/ DrTCP /Test Socket
Sky Router Tool by MRMT32
- 10-08-12, 02:25 PM #5
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
I checked with SKy and its a small wireless type symbol just to the left of the standby light,so I have tried placicing the Digi in front to the side of that without success..michael
- 10-08-12, 02:34 PM #6
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
Hi there I connected it as per your previous answer to my post I.Dont know about the splitter as I got it off e bay and its not one of the very cheap ones it has a button to change the scarts but the scarts are not marked ,so don't know whether both scarts would be live but would guess not as what would be the point of the switch? I havent had much help from AEI they just say that the digi is very sensitive,and just move it around.which is a bit difficult as I dont have anyone else in the house to check the second tv when i move the digi eye downstairs!!! so Im A bit stuck at the moment as I cant use my DVDR or change channels upstairs...Michael
- 10-08-12, 02:47 PM #7
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
Sorry Srereohaven but if you dont have anything sensible to contribute then please dont make any comment.If I wanted Multiroom I would get it,but I dont want anymore holes drilled in my ceilings or walls! michael
- 10-08-12, 03:31 PM #8
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
If I wanted Sky in another room I would have thought having a 2nd box installed was a "sensible" solution, even if my original post was tongue in cheek.

Having one more hole drilled in a wall seems much less heartache than your current predicament but each to their own. Good luck, I hope you sort it out.
- 10-08-12, 03:40 PM #9
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
Update for Scubbie on switched Splitter..Seller advises that only One Scart is live at once,as thats what switch is for,does that make a difference? reply appreciated michael
- 10-08-12, 03:58 PM #10
Re: Upgrade from SKY+ DRX280 to SKY+HD DRX890..Continuing Saga
I don't think that will do what you want. I think you may need both outlets 'live'
It is a sensible idea if more than one person in the house wants to watch different channels, but in a single viewer situation it is an unnecessary expense. Thousands of users use the magic eye solution with no problem.If I wanted Sky in another room I would have thought having a 2nd box installed was a "sensible" solution
TomD
Useful Utilites
IP Tracer /Inssider / TCPOptimiser/ DrTCP /Test Socket
Sky Router Tool by MRMT32
-
The Following User Says Thank You to Isitme For This Useful Post:
stereohaven (10-08-12)
4Likes
LinkBack URL
About LinkBacks



Reply With Quote




