Quote Originally Posted by NewsreadeR View Post
No need to do this now, you can use the custom FW here

Custom Firmware for Sagemcom 2504N (Based on Sky 6.14.2a4N_UNI)

And then change the DNS in the Sagem Settings, works a dream.


Line Rate - Upstream (Kbps): 798 kbps
Line Rate - Downstream (Kbps): 7006 kbps
LAN IPv4 Address: 192.168.0.1
WAN IPv4 Address: 2.xx.xx.xx
Default Gateway: 2.xx.xx.xx
Primary DNS Server: 208.67.222.222
Secondary DNS Server: 208.67.220.220
LAN IPv6 ULA Address:
Default IPv6 Gateway:
Date/Time: Wed Dec 12 16:06:08 2012
Yes this works fine but after a reboot it uses the defaults again anyway to make it stick ? with the custom firmware.