Hello, new to the forums / sky, so this is my first post - forgive any old ground i might be going over.

I have the Sky/Sagem f@st2304n router, firmware revision 5.14.6.1a4N

My external broadband speed is fine, my issue is with the internal network where i have 2 nodes connecting. I seem to get a max speed similar to my external broadband speed (~800Kb). Both nodes on the internal 192.168.0.1/24 are talking over 54g & i have popped the router onto 54g performance, signal is strong but still i get limited at ~800Kb - I have double checked with netcat that i am not bumping into anything else, it is almost as if i am misrouting somehow...


Stats on the router itself seem fine, & there are no collisions

<snip>
System Up Time: 56:28:19
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time
WAN MER 6722267 7635753 0 2095384575 2147483647 56:27:28
LAN Down 0 0 0 0 0 56:28:19
WLAN Up 7714688 6899972 0 2147483647 2147483647 56:28:00
ADSL Link Downstream Upstream
Connection Speed 7006 kbps 798 kbps
Line Attenuation 37.5 dB 21.4 dB
Noise Margin 7.2 dB 16.0 dB
<snip>


are there any known issues here? has anyone else successfully got the internal network running ok with this router?

I could always daisy chain another wireless router infront of the Sagem, but that seems excessive for what i'm after

any help greatly appreciated.

ta
mmc.