Results 1 to 5 of 5
This is a discussion on help within the Sky Broadband help forums, part of the Sky Broadband help and support category; Hi am new to this so take it easy with me thanks . ok i have a sagem router and ...
- 25-04-10, 10:46 PM #1
Hi am new to this so take it easy with me thanks .
ok i have a sagem router and am tryiny to connect it wireless to my laptop but cannot get a good signal , i have even put my laptop next to router and still says connected but no signal any help pleasssssss thanks
- 25-04-10, 10:49 PM #2
1. Connect an ethernet cable between the router and laptop
2. Open a browser
3. Type 192.168.0.1 into the address bar and press enter
4. Username = admin : Password = sky
5. Click setup in the top left
6. Change the channel from auto-06
7. Apply in the bottom of the page
Remove ethernet cable, reconnect wirelessly and all should be well.
- 26-04-10, 01:06 AM #3
Thanks User05 i just tryed it but still no joy will try anything u cam think of
- 26-04-10, 12:36 PM #4
When you mention it says connected but 'no signal' - what do you mean, exactly? Is the signal poor from the 5 bars listed on the wireless network connection icon?
What operating system is it?
- 26-04-10, 09:48 PM #5
Hi User05 thanks for the help laptop is runing on xp and yes it is connected to wireless network but no bars are showing on the 5 bares and the speed is 1.0 mbps but it dose go to 54.0 mbps but only for like 1sec then back to 1.0 i have changed to all channels on the router but no luck hope this helps