New Customer - Router Question
This is a discussion on New Customer - Router Question within the Sky Broadband help forums, part of the Sky Broadband help and support category; The default address of the Dlink is http://192.168.1.1 . and the username and passwords are both admin. If these have ...
- 04-10-09, 08:05 PM #11
Re: New Customer - Router Question
The default address of the Dlink is http://192.168.1.1. and the username and passwords are both admin. If these have been changed you can set it back to 'factory' by pushing a biro into the reset button which is just below the ports on the rear. One thing I will mention is that unless you have updated the firmware you may not get ADSL2+. I had to update mine.
When you get the Home page, click the Setup tab, then Connection 1 under DSL. All the settings you need to enter are here. When you have made the entries, click the System Commands button then Save Changes.
- 04-10-09, 08:20 PM #12
Re: New Customer - Router QuestionI've read this is a problem with the exchange and not Sky?