Thanks to all the skyuser Admins and Members

[Laprion]

I'd like to thanks those who have helped me and and those who helped others

I'd also like to give a BIG thanks to Scubbie for help me in Private message to get my home network sorted so i can achieve these speed in my bedroom on my main PC

[Scubbie]

No problem.

I would encourage people to post questions on the forum though. Should anyone be a little busy or on holiday, then PMs can go unanswered. It is also nice to let others join in too with their answers.

[Laprion]

that is true

[jdsimp1234]

ah, take along a laptop with you on holiday, so you can use a wireless place and answer the forum.

[Scubbie]

ah, take along a laptop with you on holiday, so you can use a wireless place and answer the forum.

Only if I can borrow yours for when I'm down looking at the wreck of M1 first

[Laprion]

just hacked my modem

# xdslcmd info --state
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 38366 Kbps, Downstream rate = 110328 Kbps
Path: 0, Upstream rate = 1999 Kbps, Downstream rate = 39998 Kbps

#

Uploaded with ImageShack.us

now i just need to figure how i can link it to the sky router so i can connect with out a wire

[andrewjr]

just hacked my modem





Uploaded with ImageShack.us

now i just need to figure how i can link it to the sky router so i can connect with out a wire

its actually quite easy. just change the modems ip address to something that is in range of the sky routers ip address and connect the modems LAN2 to any spare port on the sky router:

ie. sky routers default is 192.168.0.1 therefore i changed the modem to 192.168.0.200

[Scubbie]

Nice connection speed.

From what others have suggested, it you were to change your Router's IP to say 192.168.1.254, you should then be able to access the BTO Modem by putting in the address 192.168.1.1 in to your browser.

Remember to adjust the first and last allocated IP Addresses as 192.168.1.1 & 192.168.1.2 will be used on the BTO Modem.

Edit: Ok, Andrew's method is possibly easier.

[Laprion]

Nice connection speed.

From what others have suggested, it you were to change your Router's IP to say 192.168.1.254, you should then be able to access the BTO Modem by putting in the address 192.168.1.1 in to your browser.

Remember to adjust the first and last allocated IP Addresses as 192.168.1.1 & 192.168.1.2 will be used on the BTO Modem.

Edit: Ok, Andrew's method is possibly easier.

yeah 110 down 38 up wish i could get it

[Laprion]

thanks andrewjr that worked

whats funny is that before the hack the sky router was ok now after the hack there is a delay to connecting to it