Your forum username:
Do you already have an account?
Forgot your password?
  • Log in or Sign up


    Welcome to Sky User - The Unofficial Support Forum for everything Sky! - Proudly helping over 65k members.


    Advertisement

    Results 1 to 3 of 3

    could I get better results with these

    This is a discussion on could I get better results with these within the Router stats forums, part of the Broadband Technical Help category; how are my states been a few years since joining heres my db reading from skyuser line checker but see ...

    1. #1
      paulcarrm9mx's Avatar
      paulcarrm9mx is offline Sky User Member
      Exchange:
      Broadband ISP: Max
      Router: Non Sky Router
      Sky TV: Sky Basic
      Join Date
      Mar 2007
      Posts
      766
      Thanks
      3
      Thanked 2 Times in 2 Posts
      Blog Entries
      2

      could I get better results with these

      how are my states been a few years since joining

      heres my db reading from skyuser line checker but see attached photo

      SkyUser - Potential ADSL2 and Line Speed Calculator


      ADSL2+ Speed Test

      We estimate your line is capable of between 9mb to 10mb broadband on an ADSL2+ service.

      ppp0 Link encap:Point-Point Protocol
      inet addr:90.195.126.201 P-t-P:195.189.159.205 Mask:255.255.255.255
      UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
      RX packets:676534 errors:0 dropped:0 overruns:0 frame:0
      TX packets:515164 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:3
      RX bytes:569741718 (543.3 MiB) TX bytes:89334744 (85.1 MiB)
      Uptime 79335.31 78551.33
      Wan up 52.71 41.44
      adslctl: ADSL driver and PHY status
      Status: ShowtimeRetrain Reason: 0
      Channel: FAST, Upstream rate = 766 Kbps, Downstream rate = 7543 Kbps
      Link Power State: L0
      Mode: ADSL2+
      Channel: Fast
      Trellis: U:ON /D:ON
      Line Status: No Defect
      Training Status: Showtime
      Down Up
      SNR (dB): 7.1 12.0
      Attn(dB): 38.0 22.5
      Pwr(dBm): 12.0 12.6
      Max(Kbps): 7140 884
      Rate (Kbps): 7543 766
      G.dmt framing
      K: 245(0) 14
      R: 10 16
      S: 1 16
      D: 64 4
      ADSL2 framing
      MSGc: 56 124
      B: 244 13
      M: 1 16
      T: 1 1
      R: 10 16
      S: 1.0350 8.6877
      L: 1971 221
      D: 64 4
      Counters
      SF: 4943531 4665146
      SFErr: 1468 15
      RS: 306498974 2121707
      RSCorr: 137321 262
      RSUnCorr: 55752 0
      HEC: 1297 13
      OCD: 378 0
      LCD: 0 0
      Total Cells: 1410893132 208579179
      Data Cells: 12354223 2325290
      Drop Cells: 0
      Bit Errors: 0 0
      ES: 496 10
      SES: 1 0
      UAS: 19 22
      AS: 79309
      INP: 1.29 1.15
      PER: 16.04 17.64
      delay: 16.56 8.68
      OR: 30.91 58.93
      Bitswap: 22610 1617
      Total time = 22 hours 2 min 15 sec
      SF = 4943531
      CRC = 1468
      LOS = 0
      LOF = 0
      ES = 496
      Latest 1 day time = 22 hours 2 min 15 sec
      SF = 4943531
      CRC = 1468
      LOS = 0
      LOF = 0
      ES = 496
      Latest 15 minutes time = 2 min 15 sec
      SF = 8378
      CRC = 9
      LOS = 0
      LOF = 0
      ES = 3
      Previous 15 minutes time = 15 min 0 sec
      SF = 56143
      CRC = 30
      LOS = 0
      LOF = 0
      ES = 11
      Previous 1 day time = 0 sec
      SF = 0
      CRC = 0
      LOS = 0
      LOF = 0
      ES = 0
      15 minutes interval [-30 min to -15 min] time = 15 min 0 sec
      SF = 56082
      CRC = 23
      LOS = 0
      LOF = 0
      ES = 8
      15 minutes interval [-45 min to -30 min] time = 15 min 0 sec
      SF = 56143
      CRC = 36
      LOS = 0
      LOF = 0
      ES = 10
      15 minutes interval [-60 min to -45 min] time = 15 min 0 sec
      SF = 56082
      CRC = 7
      LOS = 0
      LOF = 0
      ES = 3
      Showtime Drop Reason: 0
      Last Retrain Reason: 0
      ChipSet Vendor Id: GSPN:0x 10
      ChipSet VersionNumber:
      ChipSet SerialNumber:
      Attached Thumbnails Attached Thumbnails could I get better results with these-capture.png  
      Last edited by paulcarrm9mx; 17-12-09 at 06:11 PM.


    2. Advertisement
    3. #2
      reddwarfcrew's Avatar
      reddwarfcrew is offline Sky User Moderator
      Exchange:
      Broadband ISP: Sky Fibre Unlimited Pro
      Router: Sky Hub SR102
      Sky TV: Sky+HD box
      Join Date
      Sep 2006
      Posts
      6,088
      Thanks
      32
      Thanked 93 Times in 86 Posts

      Re: could I get better results with these

      Usual question. Are these stats from an XTE5 filter plate or from the TEST socket underneath the faceplate on an NTE or from an extension socket.

      You should get more for your attenuation, but your noise ,margin is only around 7db and you are getting errors on your line. So it looks like you are getting the best for your current line conditions.

    4. #3
      Andy17's Avatar
      Andy17 is offline Sky User Member
      Exchange: Woodhouse (SLWD)
      Broadband ISP: Sky Fiber Max
      Router: Sky Q Hub
      Sky TV: Sky+ HD
      Join Date
      Oct 2007
      Posts
      1,373
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: could I get better results with these

      Could you post your stats from the test socket behind the master socket faceplate, details below in my sig, (test socket)

     

     

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  
    SkyUser - Copyright © 2006-2017. SatDish and NewsreadeR | SkyUser is in no way affiliated with Sky Broadband / BSkyB
    RIPA NOTICE: NO CONSENT IS GIVEN FOR INTERCEPTION OF PAGE TRANSMISSION